|
The Plug@Play system consists of 3 subcomponents: the MPO modules, the MPO-MPO Pre-Terms and the Plug&Play patch panel.
The central component is the pre-installed Plug@Play module. The MPO connector at the back of the module connects at once 12 fibres of the MPO-MPO Pre-Term. Inside the module the fibres are spread out towards the SC/LC adaptors at the front.
Plug@Play Module Characteristics
Up to 4 Plug@Play modules can be installed quickly into the Plug&Play patch panel with push rivets. With these 4 modules a medium density of 48 SC or 48 LC connections within 1U can be achieved. With the 24 LC high density module a maximum of 96 LC connections within 1U is also possible.
The insertion loss for the LANmark-OF Plug@Play module is 0,9 dB measured according to standard IEC 61300-3-45.
The insertion loss for the LANmark-OF Plug@Play low loss module is 0,6 dB measured according to standard IEC 61300-3-45.
The modules are available with OM4 fibres for multimode and are backwards compatible with OM3 fibres. The singlemode module has G652D fibres for OS2 compatibility.
The wiring inside the module is straight. This allows to maintain polarity in the MPO-link together with the pair-wise fibre flip inside the MPO-MPO Pre-Term according to method C from standard TIA 568-B-1-7-2007.
Since all connectivity is factory installed and factory tested installation times are short for a quick deployment or for frequent changes.
The Plug@Play module has standard pinned (male) connectors. This matches perfectly with the non-pinned (female) connectors of the MPO-MPO Pre-Term.
|
