svenska Login Get Registered Catalog Browser Contact Us
Global expert in cables and cabling system

About Nexans

Products and Solutions

Customer Service

Work at Nexans

News and Press
Go
Fibre optical components
Cable clamps, arranging plates and other mechanics
N3S
Splicing frames
Products for 10-19 inches and ETSI
Splice and patching cabinet
System MAXI
System TT192
Pre-terminated cross-connection sub-rack and cables
Patch cords
Patchcords Reinforced SM G.652D SC/UPC-LC/UPC
Pigtails and Fan-outs
Products for airial cable
Outlet
Adapters and mechanical connectors
Home  >  > Telecommunications - LAN - Alarm  > Fibre optical components  > Patch cords  > Patchcords Reinforced SM G.652D SC/UPC-LC/UPC

Patchcords Reinforced SM G.652D SC/UPC-LC/UPC
Send link to this page print Your Nexans contact on this page
Send link print contact us
Patchcords Reinforced SM G.652D SC/UPC-LC/UPC A complete range of high quality fiber optic patchcords for high performance telecom data transmission applications.
Standards
International  IEC 60332-3 Cat.C; IEC 60793; IEC 60794; Nexans specification
Description

Reinforced Patchcords in different length used for cross-connections or termination of active-equipment. The patchcord have two preconnected ends with SC connector in one end and LC in the other, both with UPC performance. Tight buffered fibres are used in the patchcord. The cable is sheathed with blue flame -retardant and halogene-free sheath.

The product is available in length from 1 to 50 meter and have a protection over the connectors in both ends.

 TOP
Characteristics
Construction characteristics
Type of cable GRGQBDU  
Outer sheath HFFR (polyolefin)  
Sheath colour Blue  
Reinforcement members material type Aramid yarn  
Fiber optic type SM (G.652D)  
Type of secondary protection Tight buffer  
Halogen free PE  
Connector type SC-LC  
Dimensional characteristics
Number of optical fibres 2  
Number of optical connectors 4  
External dimensions 3.2 x 5.2 mm  
Apex offset 50µm  
Tolerance of cavity diameter +1, -0 µm  
Concentricity error of cavity < 1,4 µm  
Fibre protrusion < -0,05 µm  
Fibre undercut > -0,05 µm  
Transmission characteristics
Insertion Loss, nom, 1550 nm, dB 0.22dB  
Return Loss, nominal, dB 55dB  
Mechanical characteristics
Maximum pulling force by laying 0.5kN  
Maximum permanent tensile load 0.7kN  
Usage characteristics
Field of application Indoor  
Minimum dynamic operating bending radius 40.0mm  
Storage temperature, range -40 .. 70°C  
Operating temperature, range -30 .. 60°C  
Ambient installation temperature, range -10 .. 40°C  

 TOP
Nexans © copyright 2001 - 2012   Legal Notice | Contact Us | Site Map