AXQ INFRA 1kV 4X150+41
Country ref. 0013855
StandardsInternational : HD 603 S1/5P
National : SS 424 14 18
Declaration of Performance : Reaction to fire: Eca
according to EN50575:2014+A1:2016
AXQ INFRA is a halogen free, XLPE-insulated, HFFR-sheathed cable with sector shaped (50-240 mm² ) or round (16-25 mm²) stranded aluminium conductors. The cables (50-240 mm² ) for TNS-system has an earth conductor of annealed copper. 16-25 mm² and 50-240 mm² for TNC-system has an earth conductor of aluminium. AXQ INFRA is designed according to HD 603 in applicable parts. The conductors have resistance and number of wires according to SS-EN 60228 class 2. The cores are identified by colours according to HD 308. The sheath is marked type/manufacturer/year+month/metre marking. The cable type meets the requirements for CPR class E. The cable emits no corrosive gases and has low smoke production during fire.
AXQ INFRA 1 kV is manufactured and tested according to HD 603 S1/5P in applicable parts. The cable can be loaded in accordance with national regulations on electrical installations.
Certified by Intertek SEMKO.
Quality and environmental management system
Certified according to ISO 9001, IRIS, ISO/TS 16949 and ISO 14001.
Lifemark™ recycling marking
The external surface of the outer sheath is embossed with a text which specifies all components in the polymers and prepares the cable for future recycling.
|Outer sheath||HFFR (polyolefin)|
|With Green/Yellow core||No|
|With smaller neutral conductor||Yes|
|Number of cores||5|
|Average insulation thickness||1.4mm|
|Average sheath thickness||2.6mm|
|Nominal outer diameter||41.5mm|
|Neutral conductor section (when smaller)||41mm²|
|Ground conductor cross-section||41mm²|
|Max. DC resistance of the conductor at 20°C||0.206Ohm/km|
|Resistance of the screen||0.44Ohm/km|
|Reactance at 50 Hz||0.059Ohm/km|
|Nominal phase capacitance||0.13µF / km|
|Rated Voltage Uo/U (Um)||0.6/1 kV|
|Minimum installation temperature||-10°C|
|Maximum operating temperature||90°C|
|Short-circuit max. conductor temperature||250°C|
|Smoke density||IEC 61034|
|Gases toxicity||IEC 60754|
|Bending factor when installed||8(xD)|